Booting... TBS bootloader V1.0 (Dec 28 2016 - 14:30:44) DRAM: 32 MB Flash: 4 MB kernel_offset=0x30000,rootfs_offset=0x147400 system supports single image and version is R2 out sysdata_get init ehternet... IP: 192.168.1.1 MAC: 00:02:03:04:05:06 IN: eth_init... Hit Space or Enter key to stop autoboot: 3  2  1  0 out : abortboot Checking image, please wait ... IN: prepare_tags ... IN: setup_commandline_tag ... bootargs:console=ttyS0,115200 mem=32M root=31:2 mtdparts=spi_flash:196608(boot),1143808(kernel),-1340416(rootfs),131072(multi_lang) OUT: prepare_tags ... ## Transferring Linux code from 0xbd030000 to 0x80001000... ##OK Now starting kernel ... CPU revision is: 0000cd01 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) User-defined physical RAM map: memory: 02000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00002000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00002000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 icache: 16kB/16B, dcache: 8kB/16B, scache: 0kB/0B NR_IRQS:48 PID hash table entries: 128 (order: 7, 512 bytes) console handover: boot (early0) -> real (ttyS0) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 21912k/32768k available (2913k kernel code, 10856k reserved, 823k data, 120k init, 0k highmem) Calibrating delay loop... 379.28 BogoMIPS (lpj=1896448) Mount-cache hash table entries: 512 net_namespace: 960 bytes NET: Registered protocol family 16 bio: create slab at 0 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher io scheduler noop registered io scheduler deadline registered (default) Realtek GPIO Driver for Flash Reload Default Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x18002000 (irq = 8) is a 16550A Found flash W25Q32:4MB size,64K sector! mtd: bad character after partition (1) 3 cmdlinepart partitions found on MTD device spi_flash Creating 3 MTD partitions on "spi_flash": 0x000000000000-0x000000030000 : "boot" 0x000000030000-0x000000147400 : "kernel" mtd: partition "kernel" doesn't end on an erase block -- force read-only 0x000000147400-0x000000400000 : "Partition_002" mtd: partition "Partition_002" doesn't start on an erase block boundary -- force read-only PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered MPPE/MPPC encryption/compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 Realtek WLAN driver - version 1.6 (2013-04-19) Adaptivity function - version 7.1.1 wlan_index:0 0, 134,0xb9000000,0xb8b10000,11 PCIE reset (0) Do MDIO_RESET 98 - 25MHz Clock Source Find Port=0 Device:Vender ID=818b10ec vendor_deivce_id=818b10ec HalAssociateNic OK init ok!!!wlan_index:1 Probing RTL8186 10/100 NIC-kenel stack size order(3)... NOT YET eth0 added. vid=9 Member port 0x1... eth1 added. vid=8 Member port 0x10... eth2 added. vid=9 Member port 0x2... eth3 added. vid=9 Member port 0x4... eth4 added. vid=9 Member port 0x8... (peth0) added, mapping to (eth1)... Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (512 buckets, 2048 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_l2tp version 3.1 loaded nf_conntrack_rtsp v0.6.21 loading nf_conntrack_ipsec loaded xt_time: kernel timezone is -0000 NETSPY IPPORT proc module 1.0 initialized GRE over IPv4 tunneling driver nf_nat_ipsec loaded nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team ipt_conenat_init for cone nat nf_conntrack TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Netlink(Kernel) create socket for igmp ok. Realtek FastPath:v1.03 VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 120k freed init started: BusyBox v1.6.1 (2021-06-03 15:24:41 CST) multi-call binary starting pid 17, tty '/dev/console': '/etc/init.d/rcS' @@@@@@@Welcome to TBS System@@@@@@@ Sat Jan 1 12:00:00 UTC 2011 var/ var/hosts var/udhcpd.conf var/resolv.conf var/mon.conf var/iproute2/ var/iproute2/rt_dsfield var/iproute2/rt_protos var/iproute2/rt_scopes var/iproute2/ematch_map var/iproute2/rt_realms var/iproute2/rt_tables var/mtab var/dproxy.conf var/miniupnpd.conf var/cache/ var/cache/dproxy.cache var/radvd.conf var/siproxd.conf var/igmpproxy.conf var/devlog var/dhcpv6/ var/dhcpv6/dhcp6s.conf var/dhcpv6/dhcp6c.conf var/run/ var/tmp/ var/tmp/TZ var/pid/ var/log/ var/log/wtmp var/log/lastlog var/inetd.conf var/lib/ var/lib/misc/ =============Begin Load Modules============== =============End Load Modules================ starting pid 46, tty '/dev/ttyS0': '/bin/login' (none) login: *** TBS ver:110846, compile time:Jun 3 2021,15:27:01 *** Set coredump file size to 2147483647, path = /var/core Reading config from /etc/config_full.xml ... Reading config from tbs_app_cfg ... ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready br0: starting userspace STP failed, starting kernel STP device eth0 entered promiscuous mode device wlan0 entered promiscuous mode br0: topology change detected, propagating killall: iwcontrol: no process killed killall: auth: no process killed InitPON OK InitMAC OK InitHCIDMAReg OK Get MP MAC_REG Len Select MP MAC_REG phy_BB88XX_Config_ParaFile(4960), HAL PHY_ConfigBBWithParaFile [PHY_ConfigBBWithParaFile][PHY_REG_HAL] Get MP PHY_REG Len Slecct MP PHY_REG [PHY_ConfigBBWithParaFile][PHY_REG_PG_HAL] Get MP REG_PG len select MP REG_PG [PHY_ConfigBBWithParaFile][AGC_TAB_HAL] Get MP AGC_TAB len Select MP AGC_TAB Get MP Radio A len select MP Radio A [phy_RF6052_Config_ParaFile][RadioA_HAL] Get MP Radio B len select MP Radio B [phy_RF6052_Config_ParaFile][RadioB_HAL] InitDownload FW OK [PHY_ConfigTXPwrTrackingWithParaFile][REG_TXPWR_TRK_8192EEEEEE] 0x55d = 0x1 DO 8192E IQK !!!! Done 8192E IQK !!!! br0: topology change detected, propagating cat: can't open '/dev/mtdblock3': No such device or address cat: can't open '/dev/mtdblock3': No such device or address -----------date:2021-05-21----------------- *** All module init OK *** [system]: killall nbns killall: nbns: no process killed [system]: ifconfig | grep 'wlan0'|grep -v 'grep' attached devices deamon starting... wlan0 Link encap:Ethernet HWaddr 00:02:03:04:05:06 xxxxxxxxxxxxxxxxxxx1 [system]: ifconfig wlan0 down StopHW Succeed br0: port 2(wlan0) entering disabled state [system]: rm -rf /var/run/auth-wlan0.pid [system]: ifconfig wlan0 up;sleep 2; InitPON OK InitMAC OK InitHCIDMAReg OK Get MP MAC_REG Len Select MP MAC_REG phy_BB88XX_Config_ParaFile(4960), HAL PHY_ConfigBBWithParaFile [PHY_ConfigBBWithParaFile][PHY_REG_HAL] Get MP PHY_REG Len Slecct MP PHY_REG [PHY_ConfigBBWithParaFile][PHY_REG_PG_HAL] Get MP REG_PG len select MP REG_PG [PHY_ConfigBBWithParaFile][AGC_TAB_HAL] Get MP AGC_TAB len Select MP AGC_TAB Get MP Radio A len select MP Radio A [phy_RF6052_Config_ParaFile][RadioA_HAL] Get MP Radio B len select MP Radio B [phy_RF6052_Config_ParaFile][RadioB_HAL] InitDownload FW OK [PHY_ConfigTXPwrTrackingWithParaFile][REG_TXPWR_TRK_8192EEEEEE] 0x55d = 0x1 DO 8192E IQK !!!! Done 8192E IQK !!!! br0: topology change detected, propagating [system]: echo 90000000 > /proc/sw_nat ### szPath=InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.X_TWSZ-COM_DeviceName szLanIfName = eth0 szLanIfState = Connected br0: port 2(wlan0) entering disabled state br0: port 1(eth0) entering disabled state [LAN_StatusUpdateHandler][1785]szPath=InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.X_TWSZ-COM_DeviceName szLanIfName = eth0 szLanIfState = Connected ### szPath=InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.X_TWSZ-COM_DeviceName szLanIfName = eth0 szLanIfState = Connected br0: port 2(wlan0) entering disabled state br0: port 1(eth0) entering disabled state [LAN_StatusUpdateHandler][1785]szPath=InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.X_TWSZ-COM_DeviceName szLanIfName = eth0 szLanIfState = Connected .W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W..W.RTNETLINK answers: File exists [system]: rm -rf /var/run/auth-wlan0.pid [system]: rm -rf /var/run/auth-wlan0-vxd.pid [system]: iwcontrol wlan0 <6>br0: topology change detected, propagating br0: topology change detected, propagating [PC] /sbin/udhcpc (PID 640) terminated, status code 0. RTNETLINK answers: File exists Login t process '-/bin/login' (pid 46) exited. Scheduling it for restart. starting pid 665, tty '/dev/ttyS0': '/bin/login' (none) login: Login t process '-/bin/login' (pid 665) exited. Scheduling it for restart. starting pid 666, tty '/dev/ttyS0': '/bin/login' (none) login: